<Previous | Next >       

The MAXPRO X6 can Balance charge three types of lithium cells (Li-Po/Li-Ion/Li-Mn), and charge Li-Fe.

As a safety feature the X6 will not charge Li-xx batteries that do not have a balance charging connector. (LiFe excluded),  and only one cable should be connected to the X6 balancer. 

The MaxPro X6 has 5 charging modes; FAST / NORMAL / SLOW / STORAGE / BALANCE.

▼▼▼ NOTE: Although FAST MODE and NORMAL MODE charge have the same 1C current. There can be a difference in charging time due to the different stopping current. The charge can finish within one and a half hours in the FAST Mode. But In the NORMAL Mode, they can take up to two and a half hours.

1) When a pack with an imbalance of larger than 200mV between cells is connected, only the BALANCE charging mode can be used.

2) When a pack with an imbalance of 100mV to 200mV between cells is connected, only the SLOW charging mode can be used.

3) When a pack with an imbalance of 50mV to 100mV between cells is connected, SLOW or NORMAL charging modes can be used.

4) When a pack with an imbalance of less than 50mV between cells is connected, any of the charging modes can be used.

  <Previous | Next >